Grinder

Standex Aerospace & Defense (A&D) manufactures large customized near-net-shaped metal-formed components such as fuel domes, lip skins, and other aerospace components. Our unique spin forming process is the most efficient forming process for these parts, while we also have a complementary deep draw forming process for parts with varying shapes and contours. These parts are difficult to manufacture due to their size and tight specifications. With facilities in the US and UK, our segment is positioned to serve customers in the space, aviation, and defense markets in the North American and European regions. Our deep knowledge of the forming process, combined with our multiple decades of experience, has positioned us as a critical manufacturing partner.

A Grinder is a qualified person who can use various hand and mechanical grinders and sanders to remove specific amounts material to prescribed guidelines for a desired finish or thickness of a part or tool.

What You’ll Do

Set up parts on pedestals, clean parts using prescribed cleaning agents
Operate, or tend grinding and related tools that remove excess material, burrs from surfaces,
Deburr edges, buff, hone, or polish metal
Perform typical grind / jitterbug / deburr operations to support the production schedule
Maintain the work area and equipment in a clean and orderly condition
Follow prescribed safety regulations and guidelines
Must participate in O.J.T (on the job training) as directed from time to time

Rough Grind – The process used as a preliminary or intermediate grinding operation to remove excess material from the part.

Prior to grinding, review thickness readings written on part.
Review planned thickness requirements.
Make a plan on how to efficiently achieve the desired thickness result(s) using an air grinder and various sandpaper grits.
Verify thickness results and overall finish with supervisor.
Send part to vidi-gage department for thickness check, if needed.
Neatly stage part for its next operation.

Final Grind – The process used as the last grind operation to produce the final part thickness and surface finish requirements. Operators use air grinders and various grinding grits to accomplish this process.

Prior to grinding, review thickness readings written on part.
Review planned thickness requirements.
Make a plan on how to efficiently achieve the desired thickness result(s) using an air grinder and various sandpaper grits to achieve planned thickness and surface requirements.
Verify thickness results and overall finish with supervisor.
Send part to vidi-gage department for thickness check, if needed.
Neatly stage part for its next operation.

Grind/Blend Chemical Milling Areas – The process used to grind level and blend the material steps created by the chemical milling process.

Prior to grinding, review thickness readings written on part.
Review planned thickness requirements.
Make a plan on how to efficiently achieve blend and level the material using an air grinder and various sandpaper grits.
Check material thickness if step removal is in question.
Verify thickness results and overall finish with supervisor.
Send part to vidi-gage department for thickness check, if needed.
Neatly stage part for its next operation.

Grind Weld – The process used to remove excess weld material and/or smooth the weldment.

Using a grinder, remove excess weld material and reduce weld height and irregularity.
Exercise care to prevent removal of parent material.
Ensure that a 63 Ra or better surface finish is achieved.

What You’ll Bring

No experience required (on the job training)
Ability to lift up to 50 pounds
Basic math skills
Must be able to stand for 8 hours a day
Must be able to work in a fast-paced environment
Must be open to overtime

What We Value

Six (6) months experience in warehouse production or manufacturing environment
Bilingual in Spanish/English
Ability to be a team player
Ability to be detail-oriented